Clothing Inspection

For clothing products, we generally adopt the AQL standard (Acceptable Quality Limits) to define the level of product defects and acceptable ranges.

On-site inspection points for clothing inspection:
1. Drop test
2. Ratio check
3. Product size and weight check
4. Color difference check
5. Workmanship check
6. Functional inspection of components such as zippers, buttons, rivets, etc.
7. GSM test for weight check of knitted garments
8. Print and coating adhesion check
9. Needle detection, metal detection
10. Fitting test
11. Barcode scanning test
12. Tension test
13. Odor test
14. Label check


Scope of clothing inspection:
Jackets, parkas, coats, suits, men's shirts/women's shirts, jeans, silk garments, sweaters/shorts/breeches/culottes/skirts/skorts/swimwear, T-shirts, bibs/bustiers/boxer briefs/tank tops, bras/panties, infant and toddler clothing, down jackets/cotton-padded jackets, genuine leather garments/faux leather garments, trousers/skirts/pajama sets/overalls/jumpsuits, wool sweaters/cardigans

Detailed content as follows:
I. Appearance Inspection
1. Thick and thin yarns, color differences, stains, yarn runs, damages, snags, hidden horizontal lines, pilling, hand feel;
2. Collar and armhole should lie flat and smooth.
II. Fabric Quality Inspection
Shrinkage, color difference, flat knit collar, rib stretch color matching and texture.
III. Size Inspection
Strictly according to the size chart.
IV. Symmetry Inspection
Shirt:
1. Collar tip size, whether collar bones are symmetrical;
2. Width of both shoulders and both armholes;
3. Sleeve length, cuff width;
4. Side length, vent length.
Pants:
1. Leg length, width, leg opening width;
2. Height of left and right pockets, pocket opening size, length of left and right sides of back pockets.
V. Workmanship Inspection

Shirt:
1. Stitching in all parts should be straight, neat, and secure, with appropriate tension; no floating threads, broken threads, or skipped stitches allowed; minimal backstitching that should not be in visible areas; stitch density should not be too sparse or too dense;
2. Attaching collar and setting sleeves should be even, avoiding excessive ease in collar and armhole;
3. Common defects in collar styles: crooked collar band, exposed bottom band, yarn runs along collar edge, uneven collar surface, uneven collar points, uneven collar tip size;
4. Common defects in round necklines: uneven collar placement, wavy neckline, exposed collar seam;
5. Armhole top should be straight without corners;
6. Pocket opening should be straight, and pocket edges should be neatly trimmed;
7. Excess seam allowance on hem should be neatly trimmed;
8. Shirt hem should not flare on both sides; side slits should not be uneven;
9. Topstitching should not be uneven or too tight, causing the fabric to gather;
10. Bar tack stitches should not have too many joins; pay attention to thread ends being trimmed;
11. Top and bobbin thread tension should be appropriate; all seams should not be wrinkled (especially collar, armhole, and hem);
12. Buttonhole placement should be accurate, cutting should be clean without thread fuzz, buttonhole stitching should be flat without fraying, and button sewing should not be too loose or too long.

Pants:
1. Back pocket workmanship should not be crooked; pocket opening should be straight;
2. Waistband topstitching should be parallel, not curved, and not uneven in width;
3. Bar tack stitches should meet requirements in thickness, length, and placement.
VI. Pressing Inspection
1. All parts should be pressed flat without yellowing, shine, water stains, or dirt;
2. Thread ends should be thoroughly trimmed.
VII. Material Inspection
1. Label placement and stitching, correctness of hangtags, any omissions, quality of plastic bags;
2. Color matching of cotton cords, thickness and elasticity of waistband elastic, effect of fusible interlining;
3. All according to the material list instructions.
VIII. Packaging Inspection
Folding should be neat and flat, strictly following the packaging instructions.


Guangzhou HuaJian Commodity Inspection Co., Ltd. has prepared inspection processes for various products for a wide range of clients. We are meticulous and cautious, with competitive prices, especially for long-term cooperation. Welcome to inquire! For more information, please follow Guangzhou HuaJian Commodity Inspection! www.hqc-inspection.com